| No. | Brand | s | h | a | l | L | T | H | r |
| ZX450-3 | - | - | - | - | - | - | - | - | - |
| 6204 | NSK | - | - | - | - | - | - | 474.663 mm | - |
| 10mm | - | - | - | - | - | - | - | - | - |
| 31313 | Timken | - | - | - | - | - | 41 mm | 141.5 mm | - |
| N21% | - | - | - | - | - | - | - | - | - |
| Listing52Pc | - | - | - | - | - | - | - | - | - |
| 3306Z | NSK | - | - | - | - | - | - | - | - |
| R902603018 | - | - | - | - | - | - | - | - | - |
| B71922-C-T-P4S | - | - | - | - | - | - | - | - | - |
| TRA2728 | - | - | - | - | - | - | - | - | - |
| 27D | John Deere | - | - | - | - | - | - | - | - |
| DF90T-250T/100A-140A | - | - | - | - | - | - | 690 mm | - | - |
| 8oz | - | - | - | - | - | - | - | - | - |
| 20, | - | - | - | - | - | - | - | - | - |
| ZX330-3 | - | - | - | - | - | - | - | - | - |
| NUP310ECJ | SKF | - | - | - | - | - | - | - | - |
| 10% | - | - | - | - | - | - | - | - | - |
| 950 | - | - | 50.8 mm | - | - | - | - | - | - |
| 6808 | NSK | - | - | - | - | - | - | - | - |
| R10 | - | - | - | - | - | - | - | - | - |
| 5x | - | - | - | - | - | - | - | - | - |
| 2207 | SKF | - | - | - | - | - | - | - | - |
| 600 | NTN | - | - | - | - | - | - | - | - |
| 15 mm x 32 mm x 9 mm POSB16 Inch Male Rod End Bearing, Heim Joints | Recommended diameter for attachment bolts, mm G:12 mm; Housing material:Cast iron; N4:4 mm; Thread grub screw G2:M6; End cover:ECY 207; Basic dynamic load rating C:25.5 kN; J6:146 mm; Basic static load rating C0:15.3 kN; J:126 mm; d:35 mm; Size (mm):15 mm x 32 mm x 9 mm ; |
| POS12 Rod End Bearing 12x30x69mm | Permissible sliding velocity v max.:0.5 m/s; B1:3 mm; Tolerance housing:H7; Tolerance shaft:e7; D:14 mm; B:8 mm; Permissible sliding velocity v min.:0 m/s; d:8 mm; Specific static load factor K0:45 N/mm²; Coefficient of friction µ min.:0.08; |
| PHS5 Female Rod End Bearing | Clearance:Standard; Dynamic Load Rating (kN):47.5; d:100mm; Seals or Shields:Open Type; Weight:0.02 KGS; SKU:7920a5trdulp3-nsk; Static Load Rating (kN):51.5; Preload:Light; D:140mm; Oil Limiting Speed (r/min):12500; |
| SAZK5S SALZK5S Inch Bearing 0.3125x0.875x0.437Inch | D:380mm; Clearance:Standard; Availability:In Stock; d:180mm; Seals or Shields:Open Type; Cage Type:Brass; Weight:0.02 KGS; B:126mm; SKU:22336-mb-qbl; |
| SIQG160ES Rod End Bearing 160x328x160mm | B:18mm; Grease Limiting Speed (r/min):6700; Clearance:Standard; Availability:In Stock; Static Load Rating (kN):25.2; Cage Type:Steel; SKU:6013-nsk; D:100mm; d:65mm; Weight:0.44 KGS; |
| SIA 40 ESX-2LS Rod Ends 40x94x28mm | D:6mm; SKU:mr62-2z-zen; d:2mm; Availability:In Stock; Weight:0.20 KGS; Cage Type:Steel; Seals or Shields:Two Metal Shields; Clearance:Standard; B:2.5mm; |
| PHS12 Female Rod End Bearing | J1:60.325 mm; J max.:333.375 mm; Da:180 mm; H1:114.3 mm; Cap bolt recommended tightening torque:298.3 N·m; L:387.35 mm; Max. speed for PosiTrac Plus seal:1350 r/min; R1:65.088 mm; R2:30.163 mm; Bearing:23024 CCK/W33; |
| GAKL20-PW Rod End 20x50x103mm | Dynamic Load Rating (kN):133; Reference Speed Rating (r/min):6300; d:95mm; Static Load Rating (kN):51; SKU:1319-skf; D:200mm; Seals or Shields:Open Type; Weight:0.02 KGS; Limiting Speed Rating (r/min):4300; Cage Type:Steel; |
| SABK18 SIBK18 Bearing 18x42x23mm | D:17mm; Cage Type:Steel; B:5mm; Clearance:Standard; d:7mm; SKU:697-2z-zen; Weight:0.20 KGS; Seals or Shields:Two Metal Shields; Availability:In Stock; |
| PHS8 Rod End Bearing 8x22x47mm | s1:32.7 mm; Fatigue load limit Pu:0.915 kN; Thread grub screw G2:3/8-24 UNF; Basic static load rating C0:21.6 kN; RG:1/4-28 UNF; J7:18 mm; SWN:7 mm; Hexagonal key size for grub screw N:4.763 mm; Da:98.4 mm; Recommended tightening torque for grub screw:16.5 N·m; |
| GAKR16-PW Rod End 16x42x87mm | Oil Limiting Speed (r/min):28000; Clearance:Standard; B:9mm; Static Load Rating (kN):1.19; D:30mm; Grease Limiting Speed (r/min):22000; Seals or Shields:Open Type; Cage Type:Steel; SKU:1200j-nsk; d:10mm; |
| SIBP22S Bearing 22x54x28mm | Preload:Light; Dynamic Load Rating (kN):29.6; Grease Limiting Speed (r/min):17000; Fatigue Load Rating (kN):1.02; B:16mm; Cage Type:Plastic; Static Load Rating (kN):24; Clearance:Standard; Availability:In Stock; Oil Limiting Speed (r/min):28000; |
| GAR50-UK-2RS Rod End 50x112x241mm | Cage Type:Plastic; SKU:2207e-2rs1tn9-qbl; Seals or Shields:Two Rubber Seals; Availability:In Stock; D:72mm; B:23mm; Clearance:Standard; d:35mm; Weight:0.02 KGS; |
| Long Life Combination Rose Joint SA12C 12mm*18mm*10mm | d:15mm; Cage Type:Plastic; B:15.9mm; Clearance:Standard; SKU:3202b-2rstn-qbl; Seals or Shields:Two Rubber Seals; D:35mm; Availability:In Stock; Weight:0.02 KGS; |
| SA12E Rod End Bearing Chrome Steel Bearings | Sealed Speed Rating n3:3600 rpm; d:65.000 mm; B:38.10 mm; Accessories:One Seal & Snap-Ring; Oil Speed Rating n2:4800 rpm; D:120.0000 mm; Grease Speed Rating n1:3600 rpm; Basic Static Radial Load Rating Co:106000 N; Basic Dynamic Radial Load Rating C:88000 N; Fillet Radius ra:1.50 mm; |
| Shape Ball Head Pole End Joint Bearing SQZ12-RS Rod End Bearing | Dynamic Load Rating (kN):3.19; Cage Type:Plastic; Fatigue Load Rating (kN):0.057; d:12mm; Oil Limiting Speed (r/min):127000; Clearance:Standard; B:8mm; SKU:7001ce/p4adga-skf; Availability:In Stock; Seals or Shields:Open Type; |
COM12 COM12T COR12 COR12T Inch Bearing 0.75x1.4375x0.75 Video
fag bearing nu413-m1-c3 - BDI
65MM Bore; Straight Bore Profile; 160MM Outside Diameter; 37MM Width; Brass Cage Matetrial; RBEC 1 | ISO P0; Single Row; Inner Ring - Both Sides Separable; No ...
NU413-M1-C3 FAG - ABF Store
The NU413-M1-C3 FAG is a single-row cylindrical roller bearing with cage. This bearing consists of a solid inner and outer ring with cylindrical rollers in ...
nu413-m1-c3 - fag bearing - 3BG Supply Co.
Buy FAG BEARING NU413-M1-C3 Cylindrical Roller Bearings from 3BG Supply. Buy FAG BEARING Cylindrical Roller Bearings online from 3BG Supply - We simplify ...Rolling Element: Cylindrical Roller BearingWidth MM: 37Cage Material: BrassWidth Inch: 1.457
NU413-XL-M1-C3 FAG - FAG - Cylindrical Roller Bearing ... - eBay
FAG NU1022-XL-M1-C3 Cylindrical Roller Bearing 110,00 x 170,00 x 28,00 mm Open ... thumbnail 1 - FAG NU413-XL-M1 Cylindrical Roller Bearing 65 x 160 x ...MPN: NU413-XL-M1Heat Stabilization: No Heat Stabilization - Tem...Cage Type: Brass CageWeight (kg): 3.80$394.64 · In stock
FAG NU413M1C3 Cylindrical Roller Bearing
Product Description. New in Factory box -Nu413m1c3 Fag New Cylindrical Roller Bearing. ×. Customers Also Viewed.
FAG | NU413-XL-M1-C3 | Radial Cylindrical Roller Bearing | Applied
Shop FAG NU413-XL-M1-C3 at Applied.com, which includes; Radial Bearing Type, 65 mm Inner Diameter, 160 mm Outer Diameter, 37 mm Width.
NU413-M1-C3 FAG • 247industries • Order directly online
The NU413-M1-C3 FAG is a single-row cylindrical roller bearing with cage. This bearing consists of a solid inner and outer ring with cylindrical rollers in ...
FAG NU413-M1-C3 - SP-SpareParts
NU413-M1-C3 Cylindrical roller bearings. Height: 37, Inner Diameter: 65, Outer Diameter: 160, Weight: 4060.