| 12.18.0748.002.21.1504 Standard 5 Slewing Ring Bearings | Limiting speed:6300 r/min; L:108 mm; Recommended lock nut tightening angle α:95 °; T:40.5 mm; Bearing:YSA 206-2FK; A:31 mm; DN:6.5 mm; Mass bearing unit:1.05 kg; Recommended diameter for attachment bolts, inch G:0.375 in; d:25 mm; SWN:7 mm; Basic dynamic load rating C:19.5 kN; N:12 mm; Recommended diameter for attachment bolts, mm G:10 mm; J7:24.5 mm; A3:3.2 mm; s1 ≈:22.5 mm; J:83 mm; B1:38 mm; |
| S22-140E1 Rotek Slewing Ring Bearings | housing material:Zinc-Plated Steel; shank thread length:36 mm; standards met:ISO-12 240-4; head width:11 mm; shank thread size:M16; race material:PTFE Composite; thread direction:Right Hand; misalignment angle:10 °; ball width:14 mm; lubrication type:Maintenance Free head diameter:46 mm; length to ball center:69 mm; radial static load capacity:56500 N; rod end type:Male Threaded; d:17 mm; |
| 250.15.0400.013 Type 13/5 Standard 5 Slewing Ring Bearings | manufacturer upc number:029176499326; housing construction:Split Pillow Block; mounting:Two-Bolt Base; housing material:Cast Iron; |
| 250.14.0400.013 Type 13/5 Standard 5 Slewing Ring Bearings | Basic dynamic load rating C:25.5 kN; Mass bearing unit:1.15 kg; RG:1/4-28 UNF; Recommended diameter for attachment bolts, inch G:0.5 in; Thread grub screw G2:1/4-28 UNF; Limiting speed:1100 r/min; T:46.4 mm; L:96 mm; A3:3.2 mm; N:14 mm; Housing material:Cast iron; N4:2 mm; B4:6 mm; Da:88.9 mm; d:36.512 mm; Db1:88 mm; J:130 mm; Recommended diameter for attachment bolts, mm G:12 mm; J6:106 mm; H:156 mm; |
| 230.21.0875.013 Type 21/950. Standard 5 Slewing Ring Bearings | bolt size:3/8; shaft centerline height:1-11/16 in; horizontal bolt spacing:1-1/2 in; bracket width:2-3/8 in; hub diameter:2-1/2 in; mounting type:Three-Bolt Bracket S; duty type:Standard Duty; manufacturer product page:Click here; d:0.7500 in; unit standoff:1-27/64 in; radial static load capacity:1500 lbf; length through bore:1.299 in; lubrication type:Lubrication Fitting; |
| 3R6-55N9 Rotek Slewing Ring Bearings | travel:36 in; compatible bore diameter:3-7/16 in; overall length:64 in; base width:6 in; bolt center-to-center width:3 in; D:61-1/4 in; series:22200; overall height:7 in; frame type:One-Piece Saddle Mou; compatible bearing series/part number:22200; |
| 60.20.0414.500.01.1503 Standard 5 Slewing Ring Bearings | H2:95.25 mm; h:85.725 mm; Mass pillow block:283 kg; P180°:173 kN; Eye bolt:2 x 1/2-13 UNC; Pa:75.6 kN; A1:222.25 mm; PG:1/4 NPT; Taconite seal:TER 155; J min.:628.65 mm; H:474.663 mm; Stabilizing ring:SR-44-38; da:176.213 mm; Ca:141.808 mm; Cap bolt, SAE grade:5; R2:46.831 mm; N1:41.275 mm; Housing:SAF 638; P60°:423 kN; P90°:254 kN; |
| 232.21.0775.013 Type 21/850.2 Standard 5 Slewing Ring Bearings | height to center line:6.4400 in; seal type:Triple-lip contactin; duty type:Heavy Duty; manufacturer product page:Click here; housing material:Cast Steel; Weight:44 lbs; series:QMTU; end type:Open; overall length:10.1200 in; bearing material:Bearing Steel; bearing type:Spherical Roller; overall height:7.6300 in; expansion type:Non-Expansion Bearin; rod hole diameter:1.8800 in; d:3.4375 in; manufacturer upc number:883450169363; |
| 161.25.0886.890.11.1503 Standard 5 Slewing Ring Bearings | Availability:In Stock; Seals or Shields:Open Type; Speed Rating (r/min):41600; D:37mm; B:9mm; Weight:0.04 KGS; SKU:3mm9304wicrsul-timke; Clearance:Standard; Static Load Rating (kN):7.7; Cage Type:Plastic; Dynamic Load Rating (kN):4.36; d:20mm; |
| 3R8-79N9 Rotek Slewing Ring Bearings | closure type:Single Sealed; d:1.2500 in; static load capacity:13100 lbs; series:MR - Cagerol; fillet radius:0.0400 in; D:1.7500 in; precision rating:Not Rated; lubrication hole type:Lubrication Groove &; cage material:Steel; B:1.2500 in; seal material:Rubber; flanges:No Flange; bearing material:Chrome Steel; number of rows:1; operating temperature range:-20F to 250 °F; maximum rpm:3050 RPM; manufacturer catalog number:5452010000; |
| 11.20.0755.001.21.1504 Standard 5 Slewing Ring Bearings | finish/coating:Uncoated; radial static load capacity:3440 lb; mounting:Two-Bolt Base; overall length:6.3125 in; bore type:Round; overall height:6.1250 in; series:Marathon®; lubrication type:Lubrication Fitting; base to bore centerline:1.8750 in; expansion type:Non-Expansion Bearin; radial dynamic load capacity:4850 lb; D:4-11/16 to 5-1&; d:1.2500 in; housing material:Stainless Steel; base width:1-9/16 in; |
| 61.20.0644.500.01.1503 Standard 5 Slewing Ring Bearings | compatible housed unit:DL, DLH, DLM; D:3-11/16 in; series:209; attachment method:Snap-On; width:2-21/64 in; compatible bore diameter:1-3/4 in, 1-5&#; material:Polymer; |
| 60.22.0575.502.11.1503 Standard 5 Slewing Ring Bearings | thread size:3.340-12; material / coating:Steel; includes:Lock Washer (W1; series:SNW; lock nut outside diameter:4-13/32 in; taper:1:12; lock nut number:AN17; lock washer number:W17; d:2.9375 in; compatible bearing number:1317, 22217, 1217; overall length:63.14 mm; |
| 60.25.0475.000.11.1504 Standard 5 Slewing Ring Bearings | d:50 mm; D:80 mm; B:13 mm; closure type:Sealed; manufacturer upc number:4549557016318; |