| No. | Brand | s | h | a | l | L | T | H | r |
| 6006-2NSENR | Nachi | - | - | - | - | - | - | - | - |
| (LB-AL3008) | - | - | 62.706 mm | - | - | - | - | - | - |
| 4pcs | - | - | - | - | - | - | - | - | - |
| 504 | - | - | - | - | - | - | - | 239.713 mm | - |
| 35238 | - | - | - | - | - | - | - | - | - |
| R978049353 | Rexroth | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| FLCT17/16 | Timken | - | - | - | - | - | - | - | - |
| NJ202-E-TVP2 | fag | - | - | - | - | - | - | - | - |
| 250 | fag | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| smr126-2zz, | - | - | - | - | - | - | - | - | - |
| 22212CC/C4 | SKF | - | - | - | - | - | - | - | - |
| 6156-11-3300 | - | - | - | - | - | - | - | - | - |
| 21-4 | - | - | - | - | - | - | - | - | - |
| 19124MS | Parker | - | - | - | - | - | - | - | - |
| 6221-31-3100 | - | - | - | - | - | - | - | - | - |
| 20x9 | - | - | - | - | - | - | - | - | - |
| C50L | NTN | - | - | - | - | - | - | - | - |
| 320D | INA | - | - | - | - | - | - | - | - |
| 7173-51-5 | - | - | - | - | - | - | - | - | - |
| 23Pcs | - | - | - | - | - | - | - | - | - |
| D65 | - | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | - | - | - | - | - |
| 25 | - | - | - | - | - | - | - | - | - |
| pc200-6 | INA | - | - | - | - | - | - | - | - |
| 120000liters | - | - | - | - | - | - | - | - | - |
| LS-G02-2BP-10-GN, | DAIKIN | - | - | - | - | - | 42 mm | - | - |
| GE15C GE15T/X Bearing 15x26x12mm | Grease Speed Rating n1:0 rpm; Basic Static Radial Load Rating Co:260000 N; Fillet Radius rb:1.00 mm; d:180.000 mm; B:46.00 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:208000 N; Oil Speed Rating n2:2600 rpm; D:280.0000 mm; |
| GAKR20-PB Rod Ends 20x50x103mm | Mass bearing:2.92 kg; ra max.:2 mm; Calculation factor kr:0.15; D1 ≈:184.2 mm; Da max.:201 mm; Basic dynamic load rating C:179 kN; Limiting value e:0.2; r1,2 min.:2 mm; Basic static load rating C0:255 kN; Fatigue load limit Pu:28 kN; |
| JMT5R Stainless Steel Rod End Bearing 5x17x42mm | B:74.00 mm; Sealed Speed Rating n3:730 rpm; d:320.000 mm; Basic Dynamic Radial Load Rating C:371000 N; Grease Speed Rating Open/Shielded n1:1100 rpm; D:480.0000 mm; Basic Static Radial Load Rating Co:540000 N; Accessories:One Shield & Snap-Ri; Fillet Radius ra:3.00 mm; Oil Speed Rating Open/Shielded n2:1400 rpm; |
| POS8 Male Rod End Bearing | Lock washer:W 20; P60°:185 kN; N1:22.225 mm; Initial grease fill:765.45 g; ba:45.244 mm; Taconite seal (dc shaft position):TER 106; Lock nut:AN 20; P150°:66.7 kN; Housing:SAF 320; P180°:81.4 kN; |
| GE6C GE6T/X Bearing 6x14x6mm | B:0.875 inch; Seals or Shields:Open Type; Weight:0.20 KGS; SKU:mj1.1/4-r&m; Clearance:Standard; D:3.125 inch; d:1.25 inch; Availability:In Stock; |
| SA5E Rod End Bearing Chrome Steel Bearings | B:30.2mm; Availability:In Stock; D:90mm; Weight:0.02 KGS; SKU:3210a-qbl; d:50mm; Cage Type:Steel; Seals or Shields:Open Type; Clearance:Standard; |
| SAJK10C Bearing 10x28x14mm | Weight:0.02 KGS; Cage Type:Steel; B:24mm; Oil Limiting Speed (r/min):12000; SKU:2305j-nsk; Grease Limiting Speed (r/min):9500; Seals or Shields:Open Type; d:25mm; D:62mm; Dynamic Load Rating (kN):24.9; |
| GAL35-UK-2RS Rod End Bearing 35x82x181mm | d:17.000 mm; Basic Dynamic Radial Load Rating C:23300 N; Grease Speed Rating Open/Shielded n1:11000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:14600 N; Accessories:One Shield; Oil Speed Rating Open/Shielded n2:13000 rpm; D:62.0000 mm; B:17.00 mm; |
| POSB4R Right Hand Rod End Bearing With Male Thread 6.35x19.05x49.2mm | End plug (suffix Y):EPR 15; J1:69.85 mm; RG:3/8 NPT; J min.:320.675 mm; Initial grease fill:232.47 g; Housing:SAF 026 KA; P150°:50.7 kN; Stabilizing ring:2 x 38151-26; PG:1/4 NPT; Mass pillow block:32.2 kg; |
| GIL10-UK Rod End Bearing 10x29x57.5mm | B:41mm; Reference Speed Rating (r/min):4800; Fatigue Load Rating (kN):4.9; Cage Type:Steel; SKU:7317becbj-skf; Weight:0.02 KGS; Seals or Shields:Open Type; Limiting Speed Rating (r/min):4800; d:85mm; Dynamic Load Rating (kN):156; |
| 50 mm x 90 mm x 23 mm SIQG12ESA Rod End Bearing 12x33x12mm | d:950 mm; Minimum load factor A:350; Reference speed:340 r/min; Mass bearing (including seat washer where applicable):170 kg; H:103 mm; Fatigue load limit Pu:95 kN; Basic dynamic load rating C:852 kN; r1,2 min.:5 mm; Da max.:1023 mm; Basic static load rating C0:8150 kN; Size (mm):50 mm x 90 mm x 23 mm ; |
| GIHNRK90-LO Hydraulic Rod End Bearing 90x185x296mm | Dynamic Load Rating (kN):38; Grease Limiting Speed (r/min):8000; d:22.225mm; Clearance:Standard; SKU:12648/12610-ntn; D:50.005mm; Seals or Shields:Open Type; Cage Type:Steel; Availability:In Stock; Weight:0.02 KGS; |
| SIBP20S Bearing 20x50x25mm | Clearance:C4; Static Load Rating (kN):1930; D:310mm; d:170mm; Cage Type:Steel; Limiting Speed Rating (r/min):2000; SKU:23234cck/c4w33-skf; Dynamic Load Rating (kN):1400; Weight:0.02 KGS; B:110mm; |
| SAJK22C SIJK22C Bearing 22x56x28mm | Oil Speed Rating n2:9500 rpm; B:27.00 mm; D:62.0000 mm; Accessories:Two Shields; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:28600 N; Sealed Speed Rating n3:7000 rpm; Grease Speed Rating n1:7000 rpm; d:30.000 mm; Basic Static Radial Load Rating Co:20400 N; |
| PB8S/X PB8S/H Bearing 8x22x12mm | D:100mm; B:25mm; SKU:1309ktn-nsk; Seals or Shields:Open Type; Availability:In Stock; Cage Type:Plastic; Oil Limiting Speed (r/min):7500; Static Load Rating (kN):12.7; Weight:0.02 KGS; d:45mm; |
| GAKL20-PB Rod Ends 20x50x103mm | D:28.0000 mm; Basic Dynamic Radial Load Rating C:5070 N; Fillet Radius ra:0.30 mm; d:12.000 mm; Grease Speed Rating Open/Shielded n1:26000 rpm; Oil Speed Rating Open/Shielded n2:32000 rpm; Sealed Speed Rating n3:17000 rpm; B:8.00 mm; Basic Static Radial Load Rating Co:2360 N; Accessories:Two Shields; |
Rod End Bearings & Spherical Bearings - Select & Order
Rod End Bearings & Spherical Bearings, Check out the variety of configurable, Rod End Bearings & Spherical Bearings for industrial applications.MISUMI has
Commercial Industrial Rod End Bearings
The Aurora line encompasses over 30 different standard series of rod ends in inch, or imperial, and metric dimensions
What Is a Rod End Bearing? - Monroe
Jan 16, 2019 - A rod end bearing is a common type of mechanical joint used on the ends of control rods. The steering columns in most cars, trucks and other
Aerospace Rod End and Spherical Bearings - NPB
Rod End Bearings have as many different materials and configurations as the applications they are used in. There are Ball Bearing, Plain Spherical, Loader Slot,
Rod End | [ THK || Global English ]
The Rod End is a spherical slide bearing incorporating a spherical inner ring with precision and hardness equivalent to that of steel ball bearings. It provides
Rod Ends - RBC Bearings
Heim Rod Ends While spherical plain bearings offer misalignment capability in a fixed housing position; rod ends offer ease in mounting and adjustment of position in installations such as mechanisms, linkages, and control rods
Rod end bearing - Wikipedia
A rod end bearing, also known as a heim joint (N. America) or rose joint (U.K. and elsewhere), is a mechanical articulating joint
Rod Ends Catalog - AST Bearings
Rod Ends Catalog - Full Specifications and CAD models for all types of rod end bearings
Rod End Bearings - Power Transmission ...
Results 1 - 16 of 245 - Online shopping for Rod End Bearings - Power Transmission Products from a great selection at Industrial & Scientific Store
Rod End Bearings | McMaster-Carr
Also known as rod-end bearings, ball joint rod ends have an eyelet and a ball that swivels to support angular misalignment
SILR100ES / SILR 100 ES Female Thread Rod End Bearing 100x232.5x362.5mm Video