| No. | Brand | s | h | a | l | L | T | H | r |
| E305 | - | - | - | - | - | - | - | - | - |
| 140W-V | - | - | - | - | - | - | - | - | - |
| PSVD2 | - | 77.787 mm | - | - | - | - | - | 247.65 mm | - |
| 4 | - | - | - | - | - | - | - | - | - |
| A10VD28 | - | - | - | - | - | - | - | - | - |
| H310 | - | - | - | - | - | - | - | - | - |
| [25 | - | - | - | - | - | - | - | - | - |
| ISO9001 | - | - | - | - | - | - | - | - | - |
| (50) | - | - | - | - | - | - | - | - | - |
| 40 | - | - | - | - | - | - | - | - | - |
| PE-B22463H | - | - | - | - | - | - | - | - | - |
| NJ2305 | NSK | - | - | - | - | - | - | - | - |
| QAM101 | - | - | - | - | - | - | - | - | - |
| DRC5-52/100Y | Rexroth | - | - | - | - | - | - | - | - |
| 33215 | Timken | - | - | - | - | - | - | - | - |
| S6205 | INA | - | - | - | - | - | - | - | - |
| Furniture002 | - | - | - | - | - | - | - | - | - |
| 71315SN2ENR1N0H111P3.. | Parker | - | - | - | - | - | - | - | - |
| 289 | - | - | - | - | - | - | - | - | - |
| 4" | - | - | - | - | - | - | - | - | - |
| CB250 | - | - | - | - | - | - | - | - | - |
| ST2138 | Timken | - | - | - | - | - | - | - | - |
| Se1 | - | - | - | - | - | - | - | - | - |
| 98% | - | - | - | - | - | - | - | - | - |
| F800 | - | - | - | - | - | - | - | - | - |
| 26x27 | - | - | - | 46.93 mm | - | - | 66.675 mm | - | - |
| F627zz F627 Bearing 7x22x7mm | P60°:119 kN; Da:180 mm; Bearing:23220 CCK/W33; Initial grease fill:181.44 g; P90°:71.2 kN; ba:51.594 mm; H:222.25 mm; A1:111.125 mm; Cap bolt, SAE grade:8; P180°:48.9 kN; |
| Rod Ends Bearing PHS10 | Seals or Shields:Open Type; B:20mm; d:70mm; Dynamic Load Rating (kN):39.7; Reference Speed Rating (r/min):13000; Cage Type:Steel; SKU:6014/c3-skf; Weight:0.02 KGS; Static Load Rating (kN):31; Limiting Speed Rating (r/min):8000; |
| Rod Ends Bearing POS12 | Reference Speed Rating (r/min):4050; Dynamic Load Rating (kN):305; B:39mm; D:170mm; Seals or Shields:Open Type; Cage Type:Steel; Limiting Speed Rating (r/min):4800; Availability:In Stock; Fatigue Load Rating (kN):38.5; SKU:21316-e1-k-fag; |
| POSB8 Rod End Bearing | Cage Type:Steel; Availability:In Stock; Weight:0.02 KGS; B:39mm; Dynamic Load Rating (kN):89; Seals or Shields:Open Type; SKU:1316jc3-nsk; Static Load Rating (kN):33; D:170mm; d:80mm; |
| WPB10T WPB10TG Inch Bearing 0.625x1.1875x0.75 | B:30.162mm; Dynamic Load Rating (kN):114; d:44.45mm; SKU:hm803149/hm803110-ti; Static Load Rating (kN):144; Clearance:Standard; Weight:0.02 KGS; Seals or Shields:Open Type; Availability:In Stock; D:88.9mm; |
| SI12E Combination Rod Ends With Female Thread | da min.:317 mm; D:460 mm; D1 ≈:400 mm; Db max.:453 mm; Calculation factor Y0:0.33; Calculation factor kr:0.085; Calculation factor X:0.39; r1,2 min.:4 mm; rb max.:1.5 mm; Limiting speed:1600 r/min; |
| GAL12-UK Rod End Bearing 12x34x71mm | D:200mm; Weight:3.26 KGS; SKU:6026dduc3-nsk; Static Load Rating (kN):101; Seals or Shields:Two Rubber Seals; Cage Type:Steel; Grease Limiting Speed (r/min):1900; Clearance:C3; B:33mm; Availability:In Stock; |
| GIKR8-PW Rod End 8x24x48mm | Weight:0.02 KGS; Limiting Speed Rating (r/min):3800; Static Load Rating (kN):620; d:85mm; Cage Type:Steel; D:180mm; SKU:22317ek-skf; Reference Speed Rating (r/min):2800; Availability:In Stock; Clearance:Standard; |
| Ball Joint Bearing SIBP5 | Availability:In Stock; d:280mm; SKU:24156camk30e4c3-nsk; Clearance:C3; D:460mm; Seals or Shields:Open Type; Cage Type:Brass; Weight:115.00 KGS; Oil Limiting Speed (r/min):750; Grease Limiting Speed (r/min):560; |
| GEG20C GEG20T/X Bearing 20x42x25mm | B:7mm; d:25mm; Weight:0.02 KGS; Dynamic Load Rating (kN):3.9; Seals or Shields:Open Type; Fatigue Load Rating (kN):0.129; Availability:In Stock; Oil Limiting Speed (r/min):53000; D:37mm; Static Load Rating (kN):3.05; |
| NHS18T Rod End Bearing 25x42x92mm | Permissible sliding velocity v max.:5 m/s; Specific dynamic load factor K:10 N/mm²; B:60 mm; Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; Mass bushing:0.47 kg; Specific static load factor K0:20 N/mm²; Tolerance shaft:h8; Coefficient of friction µ min.:0.05; Coefficient of friction µ max.:0.1; |
| GIR12-UK Rod End Bearing 12x34x67mm | Mass angle ring:4.3 kg; B1:18 mm; d:190 mm; r3,4 min.:5 mm; d1 ≈:264 mm; B2:29 mm; |
| KFR8 KFL8 Rod End Bearing 0.5x1.312x0.625 Inch | Lock washer:MS 3080-76; J:810 mm; Q180°:2100 kN; A1:360 mm; ATK:528 mm; Cap bolt, rec. tightening torque:600 N·m; bc:202.5 mm; Da:560 mm; N4 max.:25 mm; Ca:200 mm; |
| GIR6-UK Rod End Bearing 6x21x40.5mm | Cap bolt:4 x 3/4-10 UNC; Ca:82.804 mm; ba:65.088 mm; Lock washer:W 30; R1:95.25 mm; S:4.763 mm; J min.:431.8 mm; N1:28.575 mm; Taconite seal (db shaft position):TER 151; J max.:463.55 mm; |
| SABK14 SIBK14 Bearing 14x34x19mm | Cage Type:Plastic; SKU:30tac62bsuc10pn7b-ns; B:15mm; Weight:0.22 KGS; Seals or Shields:Open Type; D:62mm; Grease Limiting Speed (r/min):4300; Clearance:Standard; Availability:In Stock; Limiting Axial Load (kN):43; |
| PHS16.1L Rod End Bearing 16x19.4x21mm | Clearance:C3; Weight:0.02 KGS; SKU:22218-e1-k-c3-qbl; Cage Type:Steel; Availability:In Stock; Seals or Shields:Open Type; D:160mm; d:90mm; B:40mm; |
Rod Ends Catalog - AST Bearings
Rod Ends Catalog - Full Specifications and CAD models for all types of rod end bearings
Rod End | [ THK || Global English ]
The Rod End is a spherical slide bearing incorporating a spherical inner ring with precision and hardness equivalent to that of steel ball bearings. It provides
What Is a Rod End Bearing? - Monroe
Jan 16, 2019 - A rod end bearing is a common type of mechanical joint used on the ends of control rods. The steering columns in most cars, trucks and other
Rod End Bearings | McMaster-Carr
Also known as rod-end bearings, ball joint rod ends have an eyelet and a ball that swivels to support angular misalignment
Rod end bearing - Wikipedia
A rod end bearing, also known as a heim joint (N. America) or rose joint (U.K. and elsewhere), is a mechanical articulating joint
Rod End Bearings & Spherical Bearings - Select & Order
Rod End Bearings & Spherical Bearings, Check out the variety of configurable, Rod End Bearings & Spherical Bearings for industrial applications.MISUMI has
Commercial Industrial Rod End Bearings
The Aurora line encompasses over 30 different standard series of rod ends in inch, or imperial, and metric dimensions
Rod End Bearings - Power Transmission ...
Results 1 - 16 of 245 - Online shopping for Rod End Bearings - Power Transmission Products from a great selection at Industrial & Scientific Store
Rod Ends - RBC Bearings
Heim Rod Ends While spherical plain bearings offer misalignment capability in a fixed housing position; rod ends offer ease in mounting and adjustment of position in installations such as mechanisms, linkages, and control rods
Aerospace Rod End and Spherical Bearings - NPB
Rod End Bearings have as many different materials and configurations as the applications they are used in. There are Ball Bearing, Plain Spherical, Loader Slot,
GIHNRK90-LO Hydraulic Rod End Bearing 90x185x296mm Video