No. | Brand | s | h | a | l | L | T | H | r |
5 | - | - | - | - | - | - | - | - | - |
20x9 | - | - | - | - | - | - | - | - | - |
ZX240-3 | INA | - | - | - | - | - | - | - | - |
20 | - | - | - | - | - | - | - | - | - |
7314B. | fag | - | - | - | - | - | - | - | - |
250 | fag | - | - | - | - | - | - | - | - |
513173 | Timken | - | - | - | - | - | - | - | - |
QAM101 | - | - | - | - | - | - | - | - | - |
4x/5x | - | - | - | - | - | - | - | - | - |
Z50 | - | - | - | - | - | - | - | - | - |
6222M | NSK | - | - | - | 16 mm | - | - | - | - |
70W-1000W | - | - | - | - | - | - | - | - | - |
12mm | - | - | - | - | - | - | - | - | - |
4' | - | - | - | - | - | - | - | - | - |
7522E | NSK | - | - | - | - | - | - | - | - |
9107KDD | FAFNIR | - | - | - | - | - | - | - | - |
NU413-M1-C3 | fag | - | - | - | - | - | - | - | - |
C50L | NTN | - | - | - | - | - | - | - | - |
Rsfd-2 | - | - | - | - | - | - | - | - | - |
71964CDMA/HCP4A | SKF | - | - | - | - | - | - | - | - |
10mm | - | - | - | - | - | - | - | - | - |
1968-1974 | Timken | - | - | - | - | - | - | - | - |
5x11x4 | - | - | - | - | - | - | - | - | - |
JD9326 | John Deere | - | - | - | - | - | - | - | - |
25 | - | - | - | - | - | - | - | - | - |
PHSB6 Inch Female Rod End Bearing, Heim Joints | D:130.0000 mm; Fillet Radius ra:2.00 mm; B:57.20 mm; Accessories:Two Seals & Snap-Rin; Grease Speed Rating n1:3400 rpm; Basic Static Radial Load Rating Co:143000 N; Basic Dynamic Radial Load Rating C:134000 N; d:60.000 mm; Sealed Speed Rating n3:3400 rpm; Oil Speed Rating n2:4500 rpm; |
Rod Ends Bearing PHS30 | Seals or Shields:Open Type; D:115mm; Availability:In Stock; SKU:6015/c3-skf; Dynamic Load Rating (kN):41.6; Reference Speed Rating (r/min):12000; Cage Type:Steel; Static Load Rating (kN):33.5; Limiting Speed Rating (r/min):7500; B:20mm; |
SA17C SI17C Bearing 17x46x14mm | B:42mm; Weight:0.00 KGS; d:70mm; Fatigue Load Rating (kN):8.1; Cage Type:Brass; Clearance:Standard; Dynamic Load Rating (kN):167; Limiting Speed Rating (r/min):5800; Reference Speed Rating (r/min):3450; D:180mm; |
GIL50-UK-2RS Rod End Bearing 50x112x216mm | Distance JMIN:5.0781 in; Insert Bearing IB:Stainless Steel; Weight W:1.98 lb; Dimension H1:1.9375 in; Width A:1.8906 in; Dimension L:6.8906 in; Height H:3.9063 in; Basic Dynamic Radial Load Rating:5550 lbf; Distance JMAX:5.6250 in; Dimension H2:0.7813 in; |
GAKR5-PB Rod Ends 5x18x42mm | Fatigue Load Rating (kN):0.39; Cage Type:Steel; Static Load Rating (kN):8; Reference Speed Rating (r/min):13100; SKU:6006-2zr-c3-fag; d:30mm; Limiting Speed Rating (r/min):15700; Seals or Shields:Two Metal Shields; B:13mm; Availability:In Stock; |
JMT8 Stainless Steel Rod End Bearing 8x23x53mm | Weight:0.02 KGS; Static Load Rating (kN):65.5; Availability:In Stock; Reference Speed Rating (r/min):6300; Cage Type:Plastic; Clearance:Standard; Limiting Speed Rating (r/min):6300; d:75mm; B:25mm; Dynamic Load Rating (kN):73.5; |
PHS8 Female Rod End Bearing | Category:Pillow Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:9.988; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:Concentric Collar; Housing Style:4 Bolt Pillow Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Expansion; Mounting Bolts:5/8 Inch; Relubricatable:Yes; Insert Part Number:22215; Seals:Triple Lip Urethane; |
GAL45-DO-2RS Rod End 45x102x214mm | A2:149.225 mm; J max.:295.275 mm; J min.:263.525 mm; Adapter sleeve assembly:SNW 18x3.1/8; S:4.763 mm; P180°:64.9 kN; H:196.85 mm; PG:1/8 NPT; Housing:FSAFS 518; J1:53.975 mm; |
SI 70 ES-2RS Rod End Bearing 70x162x49mm | d:95mm; Grease Limiting Speed (r/min):1500; Oil Limiting Speed (r/min):2000; Dynamic Load Rating (kN):345; Weight:6.92 KGS; Cage Type:Brass; Static Load Rating (kN):435; Availability:In Stock; B:45mm; Clearance:C3; |
GEG12C GEG12C Bearing 12x26x15mm | Reference Speed Rating (r/min):1910; d:120mm; Availability:In Stock; Dynamic Load Rating (kN):820; B:76mm; D:215mm; Static Load Rating (kN):1020; Clearance:Standard; Cage Type:Plastic; Weight:0.02 KGS; |
Spherical Plain Bearings Rod End PHS10L | d:25mm; Cage Type:Steel; Seals or Shields:Open Type; D:52mm; B:18mm; Weight:0.02 KGS; SKU:2205kj-qbl; Clearance:Standard; Availability:In Stock; |
GIHNRK200-LO / GIHNRK200LO Hydraulic Rod End Bearing 200*418*620mm | 2B:86 mm; K:10 mm; Fatigue load limit Pu:71 kN; Da min.:151 mm; Ca min.:5 mm; Reference speed:1900 r/min; Basic static load rating C0:630 kN; Calculation factor e:0.83; rc max.:1 mm; d:90 mm; |
GIKPR10-PW Rod End 10x28x57mm | Clearance:C3; D:750mm; Weight:172.00 KGS; Static Load Rating (kN):7250; d:560mm; Cage Type:Brass; Seals or Shields:Open Type; Dynamic Load Rating (kN):3100; Availability:In Stock; Grease Limiting Speed (r/min):340; |
Hydraulic Rod End SIGEW32ES 32mm*43mm*32mm | Permissible sliding velocity v min.:0.25 m/s; Tolerance shaft:h8; d:14 mm; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ max.:0.1; D1:26 mm; B:14 mm; Mass bushing:0.019 kg; Specific static load factor K0:20 N/mm²; B1:3 mm; |
GIKFL25PB / GIKFL 25 PB Rod End Bearing 25x31x124mm | B:9mm; Grease Limiting Speed (r/min):30000; Availability:In Stock; Dynamic Load Rating (kN):7.15; Cage Type:Plastic; Oil Limiting Speed (r/min):45000; Preload:Light; Static Load Rating (kN):4.55; Weight:0.05 KGS; Clearance:Standard; |
SAKAC 12 M Rod Ends Bearing 12x33x16mm | Seals or Shields:Open Type; Weight:0.02 KGS; Cage Type:Brass; B:80mm; SKU:22232-e1a-k-m-c3-qbl; D:290mm; Availability:In Stock; d:160mm; Clearance:C3; |
NHS8T Rod End Bearing 12.5x22x47mm Video
Okoume Marine Plywood: BS 1088 Quality - 3mm, 4mm, 6mm
4mm, 5/32", 13 lbs, 3, BS1088. 6mm, 1/4", 21 lbs, 5, BS1088. 9mm, 3/8", 31 lbs, 5, BS1088. 12mm, 1/2", 42 lbs, 7, BS1088. 18mm, 3/4", 62 lbs, 11, BS1088
BS1088 Marine Ply | YBW Forum
Jun 20, 2007 - Having done a weeks worth of 'research' via the internet I am coming to the conclusion that the British Standard for Marine Ply (BS1088) isn't
BS 1088 - Wikipedia
In materials, BS 1088 is the British Standard specification for marine plywood that applies to plywood produced with untreated tropical hardwood veneers that have a set level of resistance to fungal attack. The plies are bonded with Weather Boil Proof (WBP) glue
Okoume Plywood - BS 1088 Joubert Marine Grade | Marine
Buy Okoume plywood online. High quality Okoume marine grade plywood by Joubert. Meets BS 1088 and Lloyd's Register Type Approved. Shipped nationwide
meranti bs1088 hydrotek 6mm 5 ply marine grade plywood 4
Our BS 1088 is Lloyds certified, the BS 6566 version allows slightly thinner veneers and some filled end splits in the faces, but the same void free core and WBP
Hydrotek, Meranti, Bs 1088 Rules 5 Ply 6mm x 4' x 8
Hydrotek Marine Plywood is manufactured utilizing BS 1088 specifications, it is a multiply type construction, with balanced internal plys and thick (1mm before
Marine Plywood - Boulter Plywood
Okoume A/B BS1088 Lloyds Approved Quantity Discounts. Water & boil proof glue (WBP), Whole piece rotary cut face, Minimum 1.2mm face veneer thickness
BS 1088 (Hydrotek) – Midwest Boat Appeal & Marine Plywood
BS 1088 Hydrotek is a multi-ply marine plywood that is superior to all standard Meranti plywood currently produced. Both face and inner plies are constructed from whole piece, color matched, Meranti veneers. Hydrotek is used in boat building applications where only the best will do