| No. | Brand | r | m | Z | D | S | G | e | A |
| SR-15W | thk | - | - | - | - | - | - | - | - |
| 3*7' | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | 23.8 mm | - | 7.5 mm | - | 16 mm | - |
| 5211 | SKF | - | - | - | - | 15.9 mm | M6x1 | - | - |
| 385B | - | - | - | - | - | 19 mm | R1/8" | - | - |
| AISBN-016 | - | - | - | 67.5 mm | - | 24.6 mm | - | - | - |
| 18mm | - | - | - | - | - | - | M6x1 | - | - |
| 1x | - | - | - | - | - | - | - | - | - |
| 3mm-28mm, | - | - | - | - | - | - | M6x1 | - | - |
| SR20SB2UU+340L | thk | - | - | - | - | - | - | - | - |
| ZX200-3 | - | - | - | - | - | - | - | - | - |
| 6224-2RS | - | - | - | - | - | - | - | - | - |
| 1220x2440mm | - | - | - | - | - | - | R1/8" | - | 65 mm |
| 4190 | Parker | - | - | - | - | - | - | - | 38 mm |
| 1250*2500mm | - | - | - | - | - | - | M6x1 | - | - |
| 18 | - | - | - | 90.6 mm | - | - | M6x1 | - | - |
| 4X8 | - | - | - | - | - | - | - | 16 mm | 27 mm |
| 20vq, | - | - | - | - | - | - | - | - | - |
| MFB12-37yc | INA | - | - | - | - | - | - | - | - |
| 3006FDCTNTG18 | RBC | - | - | - | - | - | M150x2 | - | - |
| 320B | - | - | - | - | - | - | - | - | - |
| 61808.2ZR | fag | - | - | - | - | - | - | - | - |
| 23Pcs | - | - | - | - | - | - | - | - | - |
| 41.32005 | Nachi | - | - | - | - | 14.9 mm | - | - | - |
| CB-1461P | - | - | - | - | - | - | - | - | - |
| RU85UUCC0 P5 Crossed Roller Bearings (55x120x15mm) | Dc max:151 mm; Radial clearance class:C3; E:154.5 mm; Fatigue limit load, Cu:27 kN; d:95 mm; Nlim:4,800 rpm; Da max:159 mm; d1:120.5 mm; Brand:SNR; F:112.5 mm; |
| CRBH14025UUT1 P5 Crossed Roller Bearings TMP(140x200x25mm) | Designation of housing:FE204-; N:11,5mm; d1:32.4 mm; e:19 mm; Designation of bearing:EX202-10G2T20; A1:10 mm; B:34 mm; S:17 mm; C:12.8 kN; B1:43.5 mm; |
| CRBH7013UUT1 P5 Crossed Roller Bearings (70x100x13mm) | Self Aligning:Self Centering; Bearing Bore Shape:Round; End Cap Groove:No; Manufacturing Plant Location:Rogersville, TN; Bearing Outer Ring Material:Steel; Shaft Attachment (2):Set Screw; Flinger Type:None; Bearing Duty:Medium Duty; Base to Center Height:Not Applicable; Housing Type:4 Bolt Flange; |
| RA18013CC0 Crossed Roller Bearings (180x206x13mm) Thin Section | Recommended tightening torque for set screw:22 Nm; C0:32.8 kN; B:53.7 mm; Designation of bearing:US212G2T04; Weight:1.3 kg; P:300 mm; d:60 mm; A5:38.8 mm; S:14.9 mm; T min.:-40 °C; |
| RB22025UUCC0 P5 Crossed Roller Bearings (220x280x25mm) | Note:This product line wa; Dimension M:11.0 in; Bearing Number:HSM230BR; Bearing - Housing - Seal:HSM230BRHRSS; Dimension H2:28.7 in; Bolt Size:4 x M42; Ca - Axial Load Rating:24594 lbf; Dimension K:7.0 in; Cr - Dynamic Load Rating:374307 lbf; Support Type:Four-Bolt Plummer Bl; |
| RB9016UUCC0 P5 Crossed Roller Bearings (90x130x16mm) | B:5.3750 in; Bearing Configuration:Thrust TTHD - with c; Dynamic Load Rating:408000 lbf; d - Bore Diameter:11.0000 in; Weight:467.4 lb; Bearing Type:Thrust Tapered Rolle; r - Fillet Radius Housing (Max):0.44 in; Static Load Rating:5690000 lbf; D - Bearing O.D.:23.7500 in; R - Fillet Radius Shaft (Max):0.06 in; |
| RA19013CC0 Crossed Roller Bearings (190x216x13mm) Thin Section | H1:14.5 mm; Weight:0.88 kg; Z:52.7 mm; A:41.5 mm; Designation of housing:PLE206N-; N1:24.5 mm; Dz:70 mm; H2:79.5 mm; S:8 mm; C0:11.2 kN; |
| RA9008CC0 Crossed Roller Bearings (90x106x8mm) Robotic Bearing | Dimension C:7.480 in; Weight:115 lb; Grease Lubrication - M/N Seal:650 rpm; Y1 - Geometry Factor:2.67; Bearing Number:22228; Dimension H:1.50 in; Dimension J (Bolt Size):1.125 in; Dimension F:7.75 in; Y2 - Geometry Factor:3.98; Housing Style:Round Flange; |
| RB18025UUCC0 P5 Crossed Roller Bearings (180x240x25mm) | Recommended tightening torque for set screw:8 Nm; S:18.8 mm; J:82.6 mm; A1:27 mm; L1:22.5 mm; d1:51.1 mm; s1:36.3 mm; G:R1/8"; B1:51.1 mm; T min.:-20 °C; |
| RA8008CC0 Crossed Roller Bearings TMP (80x96x8mm) | L1:111.00 mm; Locknut:KM30; Appropriate Hydraulic Nut:HMV30; G:M150x2; Lockwasher and Lockplates:MB30; Weight:5.50 Kg; D3:195 mm; d1:5.250 in; C:26 mm; |
| SX011828 Crossed Roller Bearings (140x175x18mm) | Aa - Cage-Cone Backface Clearance:0.13 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:13300 lbf; Series:775; Cg - Geometry Factor:0.107; K - Factor8:1.51; Design Units:Imperial; Cage Type:Stamped Steel; Cone Part Number:777; G1 - Heat Generation Factor (Roller-Raceway):227.3; db - Cone Backface Backing Diameter:4.96 in; |
| 75 x 6.299 Inch | 160 Millimeter x 1.457 Inch | 37 Millimeter RB20025UUCC0 P5 Crossed Roller Bearings (200x260x25mm) | T min.:-20 °C; Designation of open end cover:SCOU205-16; Recommended tightening torque for set screw:3.7 Nm; C0:7.88 kN; L:75 mm; Dz:60 mm; L1:25 mm; B:34 mm; s1:17 mm; J:50 mm; Size (mm):75 x 6.299 Inch | 160 Millimeter x 1.457 Inch | 37 Millimeter ; |
| SX011836 Crossed Roller Bearings (180x225x22mm) | Dimension Y:0.6 in; Cor - Static Load Rating:36194 lbf; Note:This product line wa; Dimension N:10.5 in; Dimension B:6.0 in; Dimension V:4.5 in; Bearing - Housing - Seal:LSM75BRHHTPS; Shaft Size:75 mm; Dimension H:1.6 in; Ca - Axial Load Rating:1708.53 lbf; |
| RB1000110UUCC0 P5 Crossed Roller Bearings (1000x1250x110mm) | Dimension L :15-23/64 in; Dimension J2 :11-47/64 in; Cor - Static Load Rating:52033 lbf; Dimension H :4-1/2 in; Support Type:Four-Bolt Plummer Bl; Note:This product line wa; Pillow/Plummer Block Style:Split Cylindrical Ho; Bearing Type:Split Cylindrical Ex; Maximum Speed:2790 rpm; Dimension H2:9.6 in; |
| CRBH9016UUT1 P5 Crossed Roller Bearings (90x130x16mm) | Max Grease Speed:2600; UPC Code:999999999; Seal:LO224; Material :Cast Iron; Max Oil Speed:3200; Bolt Qty:2; H1:140.0 mm; Cage Type:EJ; C0 Static Load Rating:772; N:26 mm; |
| RA20013CC0 Crossed Roller Bearings (200x226x13mm) | Cr - Dynamic Load Rating:72.7 kN; C0r - Static Load Rating:53 kN; Grease Reference Speed:5200 rpm; Radius Rs min:2.000 mm; Outside Diameter D:140.000 mm; Outside Ring Width B:26.000 mm; Features:Contact Seals; Oil Reference Speed:7500 rpm; Clearance:C3; Weight:1.4 Kg; |
RB50040UUCC0 P5 Crossed Roller Bearings (500x600x40mm) Video