| No. | Brand | T | k | D | r | C | L | A | f |
| 18mm | - | - | - | - | - | - | - | - | - |
| GSX400 | - | - | - | - | - | - | - | - | - |
| 20X25X4 | - | - | - | - | - | - | - | - | - |
| 3 | Rexroth | - | - | - | - | - | - | - | - |
| EC210B | - | - | - | 130 mm | - | - | - | - | - |
| HSR30CA+440L | thk | - | - | - | - | - | - | - | - |
| ER10 | RBC | - | - | - | - | 14 kN | 84 mm | - | - |
| R901071987 | Rexroth | - | - | - | - | - | - | - | - |
| LPVD45/LPVD64/LPVD75/LPVD90/LPVD100 | - | - | - | - | - | - | - | - | - |
| 22234 | NSK | - | - | - | - | - | - | - | - |
| QJ207MPA.S1.T42A | fag | - | - | 320 mm | - | - | - | - | - |
| RNA4905 | - | - | - | - | - | - | - | - | - |
| 301 | - | - | - | - | - | - | - | - | - |
| NU238-E-M1-C3 | - | - | - | 230 mm | - | - | - | - | - |
| ZX870 | - | - | - | - | - | - | - | - | - |
| 80x100x10 | - | - | - | - | - | - | - | - | - |
| 4*8' | - | - | - | - | - | 31.85 kN | 144 mm | - | - |
| GSB107-01,GSB107-01A | Hitachi | - | - | - | - | - | - | - | - |
| 30 | - | - | - | - | - | 25.7 kN | - | - | - |
| KLFXSS2M30E, | Rexnord | - | - | - | - | - | - | - | - |
| BK0609 Closed End Needle Roller Bearing 6x10x9mm | Raceway Ring Shape:Cylindrical Roller; Internal Symbol:No; Inner/Outer Ring Material:Steel; Bearing Ring Type:No; Size Standards:Metric System; O.D.(Ø):270; Outer Ring:With Outer Ring; Load Direction:Radial; I.D.(Ø):130; |
| RPNA15/28 Needle Roller Bearing 15x28x12mm | Type:Bearings with Housin; Bearing Part Number:6003; Flange Shape:Round Type; Bearing Used:Deep Groove Ball Bea; Days to Ship:8 Days; RoHS:6; Volume Discount:Available; Bearing I.D. d(mm):17; Housing Material:304 Stainless Steel; |
| F92529 Bearing 58.2mm×95m×6.1mm | Inventory:0.0; Ew:66 mm; Minimum Buy Quantity:N/A; Characteristic inner ring frequency, BPFI:20.95 Hz; Fw:60 mm; Weight / Kilogram:0.102; Min operating temperature, Tmin:-20 °C; Brand:NTN; Characteristic rolling element frequency, BSF:20.95 Hz; Characteristic cage frequency, FTF:0.48 Hz; |
| High Quality Cage Bearing K32*40*20 | Weight:0.64 kg; Recommended tightening torque for set screw:5.5 Nm; J:94.5 mm; B:31 mm; Dz:54 mm; C:12.8 kN; L:126.5 mm; C0:6.65 kN; T max.:100 °C; s1:15.5 mm; |
| TLA79 Drawn Cup Needle Roller Bearing | Basic Dynamic Load Rating(N):5350; d:45; Preload Mark:C2; Size Standards:Metric System; Max. Allowed rpm(rpm):11000; Types:16**/6*** series; Holder Symbol:JR; D:58; Rolling Element Material:Steel; Load Direction:Radial; |
| High Quality Cage Bearing K58*65*18 | Flange Shape:Square Type; RoHS:6; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Shape:Flange Type; Days to Ship:8 Days; Volume Discount:Available; Holder Surface Treatment:Not Provided; Number of Bearings:Single; |
| ZARF2575TN Combined Needle Roller Bearing 25x75x50mm | Bearing I.D. d(mm):10; Bearing Material:[Steel] Steel; Shape:T-Shaped; Type:Bearings with Housin; Housing Material:[Aluminum Alloy] Alu; Height H(mm):20 ～ 40; Seals:ZZ (Double Shield); Thickness, Height Indication:T, h Configurable; RoHS:6; |
| IR6X9X12 Needle Roller Bearing Inner Ring | D:68; Specifications, Environment:Standard; Bearing Style:Double Shielded; Transmitter Material:Steel; Load Type:Radial; B:12; Bearing Ring Material:Steel; Type:Ball; Sealing Structure:Double Shielded; Basic Static Load Rating Cor(N):10900; |
| SCE1414-PP Needle Roller Bearing | Weight:1.76 kg; T max.:100 °C; Z:55.7 mm; C:29.6 kN; C0:18.2 kN; N:15mm; G:M6x1; L1:87 mm; J:144 mm; Recommended tightening torque for set screw:8 Nm; |
| MH18161 Inch Needle Roller Bearing 28.575x38.1x25.4mm | Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Stroke:No; Surface Treatment:No; Diameter series symbol:Used for Light load; Days to Ship:9 Days; Bearing Inner Dia. Shape:Tapered hole adapter; Unit Body Material:Cast Iron; |
| AXW30 Axial Needle Roller Bearing | Brand:NTN; Min operating temperature, Tmin:-20 °C; Minimum Buy Quantity:N/A; Fw:18 mm; Inventory:0.0; Nlim (oil):21,000 rpm; Mass:0.02 kg; Lw:15.8 mm; Cr:14.6 kN; Max operating temperature, Tmax:120 °C; |
| IR20X25X17 Needle Roller Bearing Inner Ring 20x25x17mm | ra max:1 mm; da min:50 mm; da max:52.5 mm; f0:15.3; Characteristic inner ring frequency, BPFI:7.45 Hz; Dynamic load, C:21 kN; d:45 mm; Fatigue limit load, Cu:0.69 kN; Da max:70 mm; Nlim (grease):5,400 rpm; |
| NAV4010 Needle Roller Bearing 50x80x30mm | Height H(mm):30 ～ 50; Type:Bearings with Housin; Bearing I.D. d(mm):15; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Holder Surface Treatment:Clear Anodize; Seals:DD (Contact Rubber S; Mount Type:Base Face Type; Number of Bearings:Single; |
| SCE812 Needle Roller Bearing | Housing Material:1045 Carbon Steel; Seals:VV (Non-Contact Rubb; Bearing Used:Deep Groove Ball Bea; Flange Shape:Compact Type; Days to Ship:7 Days; Width T(mm):20 ～ 60; Bearing Retained:No; Holder Surface Treatment:Black Oxide Coating; Bearing I.D. d(mm):10; |
| 93334 Needle Roller Cage Assemblies 19.05x28.575x53.975mm | Days to Ship:6 Days; Seals:Provided; Shaft:None; Category:Roller Follower; Roller Lining:None; Inner Ring:Provided; Basic Load Rating Cor (Static)(kN):2.65; D:16; |
| NUTR15 Yoke Type Track Roller Bearing | I.D.(φ):9; RoHS:6; Thickness T(mm):5; Outer Diameter D(φ):45; Surface Treatment:Black oxide finish; Material:1045 Carbon Steel; Days to Ship:22 Days or more; |
Needle Roller Bearings: Needle Bearing, Cages & Cam
Featuring a high load carrying capacity, needle roller bearings use long thin rollers - known as bearing needles - as their rolling element. The inner and outer
Needle roller bearing - Wikipedia
A needle roller bearing is a special type of roller bearing which uses long, thin cylindrical rollers resembling needles. Ordinary roller bearings' rollers are only slightly longer than their diameter, but needle bearings typically have rollers that are at least four times longer than their diameter
Needle Roller Bearings
Bearings. Drawn Cup Roller. Clutches. Track Rollers. Radial Needle Roller and Cage Assemblies. Heavy-Duty. Needle Roller. Bearings. Thrust Bearings,
Needle Roller Bearings/Product Information/Koyo Bearings
The track roller is a bearing with needle rollers built into a thick outer ring. It is available in a stud type and a yoke type. Both of these can be tailored to suit the
Needle Roller Bearings - NTN SNR
12.2.3 Precautions for using NTN needle roller Bearing with. Solid Grease … ... Needle roller bearings have relatively small diameter cylindrical rolling elements
Needle Roller Bearings | NTN Bearing
Needle bearings feature a smaller cross-section, higher load-carrying capacity, greater rigidity, and lower inertia forces that facilitate size and weight reductions
Needle roller and thrust bearings, and cam rollers | NTN SNR
Choose your needle roller bearings and cam rollers from among our vast premium range, already used by thousands of original equipment manufacturers
Needle roller bearings | SKF
SKF needle roller bearings are bearings with cylindrical rollers that are small in diameter relative to their length. The modified roller/raceway profile prevents
Needle roller bearings by INA | Schaeffler Germany
Needle roller bearings have a long track record as proven machine elements for the design of radially compact bearing arrangements with very high
Needle Roller Bearings | Roller Bearings | Products | NSK
Needle roller bearings are a bearing that is classified as either radial or thrust depending on the direction of the load being supported. Needle roller bearings include bearings whose rollers slightly exceed the size range of needle rollers as stipulated by ISO
SCE2020 Needle Roller Bearing Video