No. | Brand | T | k | D | r | C | L | A | f |
69-301 | - | - | - | 180 | - | - | - | - | - |
6-Burner | - | - | - | - | - | - | - | - | - |
A8vo55 | Rexroth | - | - | - | - | - | - | - | - |
6009-2NSE | Nachi | - | - | - | - | - | - | - | - |
1220X2440 | - | - | - | - | - | 29.6 kN | 135 mm | - | - |
A6VE160HZ3 | INA | - | - | - | - | - | - | - | - |
514 | - | - | - | - | - | - | - | - | - |
99.5% | - | - | - | - | - | - | - | - | - |
1000 | koyo | - | - | - | - | - | - | - | - |
3304 | SKF | - | - | - | - | - | - | - | - |
3926412 | - | - | - | - | - | - | - | - | - |
Ex480 | Hitachi | - | - | - | - | - | - | - | - |
Xwd5 | - | - | - | - | - | - | - | - | - |
6x4 | John Deere | - | - | - | - | - | - | - | - |
27PC | - | - | - | - | - | 52.5 kN | - | 68 mm | - |
2016 | - | - | - | - | - | - | - | - | - |
XT600 | - | - | - | 72 | - | - | - | - | - |
SH290-3 | - | - | - | - | - | - | - | - | - |
6314-RS1 | - | - | - | - | - | - | 100 mm | - | - |
BT10044 | NTN | - | - | - | - | - | - | - | - |
10pcs | - | - | - | - | - | - | - | - | - |
100pcs/lot | - | - | - | 75 | - | - | - | - | - |
500ml | - | - | - | - | - | - | - | - | - |
SN116 Needle Roller Bearing 17.462x22.225x9.525mm | Diameter series symbol:Used for Light load; Unit Body Material:Cast Iron; RoHS:6; Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit; Pillow Type, Category:Standard; B:42.9; Fit:J7; d:30; Surface Treatment:No; |
BK1010 Needle Roller Bearing | Width T(mm):13; Volume Discount:Available; Flange Shape:Compact Type; Type:Bearings with Housin; Bearing I.D. d(mm):30; Shape:Flanged Pilot Type; RoHS:6; Bearing Used:Deep Groove Ball Bea; Seals:ZZ (Double Shield); Bearing Retained:Yes (with retaining; |
NKX70Z NKX70-Z Combined Needle Roller Bearing 70x85x40mm | Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Seals:VV (Non-Contact Rubb; Number of Bearings:Double; Housing Material:1045 Carbon Steel; Flange O.D. H(φ):88; Shape:Flanged Pilot Type; Flange Shape:Compact Type; |
NTB1226 Thrust Needle Roller Bearing 12x26x2mm | Mass:0.61 kg; ra max:1.5 mm; d1:51.9 mm; d:40 mm; rs min:1.5 mm; Characteristic outer ring frequency, BPF0:3.07 Hz; Fatigue limit load, Cu:1.09 kN; Nref:9,000 rpm; Nlim:11,000 rpm; da max:51.9 mm; |
64907 Needle Roller Cage Assemblies 32x52x49mm | A1:14 mm; J:130 mm; Designation of housing:FL207-; d1:51.1 mm; B1:51.1 mm; Recommended tightening torque for set screw:8 Nm; N:16mm; d:31.75 mm; S:18.8 mm; B:37.6 mm; |
B96 Inch Needle Roller Bearing 14.288x19.05x9.53mm | L1:62 mm; S:19 mm; C:31.85 kN; C0:20.8 kN; Designation of open end cover:SCOU209-27; N:17mm; G:M6x1; J:146 mm; B:49.2 mm; A:70 mm; |
ZARF2590TV Combined Needle Roller Bearing 25x90x60mm | Machining:Cast iron cover moun; Fit:J7; Surface Treatment:No; Bearing Inner Dia. Shape:Tapered hole adapter; Stroke:No; Bearing Unit, Type:Round flange shape; Grease Type:Standard Grease; Seal:Nitrile; |
23050401 Needle Roller Bearing 22*32*13mm | Housing Material:1045 Carbon Steel; RoHS:6; Number of Bearings:Single; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):8; Holder Surface Treatment:Electroless Nickel P; Bearing Material:[Steel] Steel; Shape:L-Shaped; |
High Quality Cage Bearing K45*50*27 | Designation of housing:SP203-205/40-; s1:23.05 mm; C0:4.78 kN; d1:27.2 mm; Recommended tightening torque for set screw:3.7 Nm; SW:3.18 mm; T min.:-40 °C; L:264 mm; T max.:100 °C; S:6.5 mm; |
ZARN130240 Bearing | J:228 mm; N:35mm; Designation of bearing:EX319G2T04; A2:114.5 mm; e:39 mm; L:290 mm; A1:30 mm; T min.:-40 °C; Weight:26.4 kg; C0:122 kN; |
NBX1023Z Needle Roller Bearing 17×26×30mm | Combination symbol:No; Outer Ring Type:Flat; Basic Load Rating, Dynamic Rating(N):229000; Rolling Element Material:Steel; Holder Symbol:TB; Symbol of Bearing Ring Shape:No; Symbol of contact angle:No; Inner/Outer Ring Material:Steel; Retainer Type:Punching; |
NK85/25 Needle Roller Bearing 85x105x25mm | B1:71.3 mm; s1:48.4 mm; A5:27.7 mm; d1:74.5 mm; G:M6x1; S:27.7 mm; Recommended tightening torque for set screw:22 Nm; d:55 mm; A:35 mm; B:55.4 mm; |
K28*36*16 Needle Cage Bearing | Flange O.D. H(φ):52; Shape:Flange Type; Type:Bearings with Housin; Holder Surface Treatment:Not Provided; RoHS:6; Width T(mm):25 ~ 60; Bearing Retained:Yes (with retaining; |
190640 Needle Roller Cage Assemblies 30.163x49.213x63.5mm | Volume Discount:Available; Width T(mm):40; Number of Bearings:Double; Shape:Flanged Pilot Type; Housing Material:1045 Carbon Steel; Type:Bearings with Housin; Bearing I.D. d(mm):5; Days to Ship:7 Days; Bearing Retained:Yes (with retaining; |
40BTM4720 Needle Roller Bearing 40x47x20mm | Type:Ball; Size Standards:Metric System; Precision:Grade 0; Basic Dynamic Load Rating(N):8800; Number of Raceway Ring Rows:Single Row; Rolling Element Material:Steel; Load Direction:Radial; Seal, Shield Symbols:LLB; |
B88 Inch Full Complement Needle Roller Bearing 12.7x17.463x12.7mm | d1:86 mm; A:33 mm; s1:57.6 mm; C0:40 kN; H3:150; L:215 mm; B1:85.7 mm; N:18mm; J:177 mm; A2:51.6 mm; |
High Quality Cage Bearing K18*24*13 Video